Modern Kitchen Decor Using Ceramic Tile Flooring and Wooden Wall Storage Cabinets

One of the reasons most people prefer to buy foreclosed properties is because of their affordable price tags – especially when you compare them to other forms of houses on the market. For those who have recently bought a foreclosed home, you’ll be able to continue with budget-friendly renovations by taking in mind the tips below for redesigning your kitchen.

Basic Types of Kitchen Layouts

The easiest and best way to redesigning the kitchen of your new foreclosed home is by thinking of a layout first. Listed here are the most frequently used types of kitchen layouts. One of these is likely to satisfy your residence.

Ceramic Tile Flooring

Single-Line Layout

The single-line layout is also called a one-wall layout. It truly is most proper to utilize in houses with small kitchen spaces. With this type of layout, you’ve got all your kitchen equipment and appliances lined at one side of the room. The other half of the room is normally only contain space for you to walk back-and-forth.

This type of kitchen can generally accommodate only small to moderate sizes for gear and furniture. You would likewise need to optimize usage of vertical space by installing wall-mounted cabinetry, too as using ceiling-mounted racks for wine bottles, glasses as well as other kinds of kitchenware.

L-Shaped Layout

Such a layout typically includes having the sink about the shorter end of the space and also the remaining equipment and appliances lined through to another side. Again, there’s generally not enough space remaining to incorporate a worktable or isle.

Sinks are generally separated in the remaining portion of the kitchen’s equipment in this type of layout as it minimizes injuries. Everything that has to be washed and rinsed is done in the sink while everything that can be prepared in their own dried and frozen form may be performed thus at another side.

Two-Lined Layout

This kind of layout is appropriate for moderate-sized kitchens that can adapt more kitchen gear however do possess enough space to incorporate a worktable or island in the center of the area. It is also less difficult to keep your kitchen organized with this type of layout.

As an example, you can adapt the typical organization for L-shaped layouts by keeping the sink and dishwasher – everything that has to do with washing and rinsing, that is – on side while everything else is done on the opposite side. Another ideal organization would be to have all roasting and baking-related gear put on a single side while everything that has to be fried, cooked, or broiled might be ready in the other side.

U-Shaped Layout

A U shaped layout is more suitable and useful for those who have a sizable kitchen in your new foreclosed house. This type of layout additionally allows one to be much more organized. Everything that’s to do with storage for example cupboards and your fridge might be on the shorter end of the layout while everything that has to do with food preparation might be divided between the two longer spans of the kitchen.

Island Layout

Lastly, those with lots of room to work with when redesigning their kitchen should seriously consider using this kind of layout. It may be a modified version of the U, two-line, or L-shaped layout. The only real difference is the fact that it has an island or worktable at the middle and which may double as your dining area.

Article Source: House Layout Plans

Installing Ceramic or Porcelain Tile

Ceramic and porcelain usually find their way into kitchens, bathrooms, laundry rooms and mud rooms. When contemplating a tile installation, homeowners have numerous options available to them: everything from high-end, designer tiles to bargain-basement specials. Before hunting up the perfect style of tile, one must consider a few factors such as tile composition and strength. Experts recommend a clay-based tile for flooring projects where the hardness level matches its function.

For instance, a tile with a hardness rating of one should only be installed in light traffic areas like bathrooms while a tile with a hardness rating of five can be installed anywhere. Ceramic tiles are generally rated from one to three while porcelain tiles fit the description of group-five tiles. Ceramic tiles are softer and less durable than porcelain tiles, and they generally cost less than their porcelain counterparts. Although the average cost per square foot of tile varies by location, great deals can generally be found at hardware stores or tile discount centers.

Selecting A Tile Contractor

There are many tile installation companies to choose from. The internet has plenty of consumer review sites that give good indications on whether a contractor does acceptable work. However, one should learn a little about the tile installation process before sitting down with a contractor to talk about a new project. This is an important step because it allows the consumer to ask relevant questions and make informed decisions about their particular tile installation project.

Consumers should ask to see a portfolio of the tile installer’s work and ask for references from satisfied clients. While there are many talented tile installers who operate their own businesses, there are marked benefits for selecting a contractor associated with one of the big-box hardware stores. Because their reputations are on the line, these stores hire reputable subcontractors for residential tile installation jobs, so the consumer gets pre-screened labor whose work is backed by a large company with set labor rates. It is recommended that a homeowner get quotes from multiple contractors so that they can get a general idea of the going labor rates for their area.

Porcelain Tile

Installing Tile over Existing Flooring

The type of flooring foundation and the room configuration affect the price charged by contractors. For example, having ceramic tile installed on a cement floor will likely cost more than having the same tiles installed in a kitchen sitting on a wood foundational surface. The latter example requires fewer materials and less time to complete the installation.

The cost factors involved with installing tile over concrete flooring are the additional labor hours and materials needed to smooth and level the floor surface in preparation for laying the tile. For a cement floor, the tile installer must ensure that the floor is clean, smooth, dry and free of holes or divots. If there are surface cracks or small holes, the installer may use a product called Thin-Set to prepare the surface for tiling. After smoothing the surface, installers apply a latex primer to the flooring surface to prepare it for installation. The next step in the process is to determine if the surface is level, and if it is not, the installer must lay down a self-leveling compound.

Wood sub-flooring is a less-than-ideal foundation for ceramic tile because it naturally warps when exposed to high levels of moisture. When the wood loses its integrity, the tiles can pop off or break. The solution is to use a material called backer board to provide a level cement surface on which to lay the tile. Special screws are needed to secure the cement sheets in place.


How To Tile Around A Tub

Because a shower enclosure is a wet installation, you must waterproof the walls and the framing. Use felt paper with cement backerboard but not with greenboard or waterproofed gypsum board. A bathtub introduces additional challenges. If the tub is level, set a full tile at its top edge. To help hide the awkward appearance of an out-of-level tub, make the bottom row of tiles at least three-fourths of a tile high. Read more…

How to Tile Around a Tub

Tile is the most popular choice for walls in new and remodeled baths because it’s impervious to water, extremely stain-resistant, easy to clean, and available in dozens of colors, sizes and styles. With the right tools and materials – and the patience to lay out the tiles properly – tiling a bath or shower surround is a job that most homeowners can pull off.

For the project shown here, we enlisted the help of tile contractor Joe Ferrante, who has been laying tile for This Old House projects since 1986. The first and most important step, insists Ferrante, is to start with a clean, stable substrate. He then fills the backer board seams with thinset mortar and embeds fiberglass-mesh joint tape int he mortar. Finally, to ensure a strong, long-lasting bond for the new tiles, Ferrante goes one step further and trowels thinset mortar over the entire wall. Read more…

Tiling Tub

Installing Ceramic Wall Tile Around a Bath Tub Enclosure

Obviously, you need to start out by measuring each wall. Measure the height and width of each vertical wall and then multiple the width and height to get the square footage for each wall. Note the height of the outside edge along the tub if you are going to use a bullnose tile for finishing the tile. Bullnose are the tiles with one edge rounded for a truly finished appearance. The field tile is sold by the square foot and bullnose and other trim pieces are sold by the piece. Be sure to order at least five percent extra to allow for broken or chipped pieces. Also, check to be sure the field tile all have the same shade letter or number. Read more…

How to Install Tile Backer Around a Tub

Tile walls of a bathroom tub or shower enclosure need a solid, water-resistant substrate as backing. Concrete tile backer board can provide the strong, solid background the tiles need to adhere without movement or the potential for water damage, which can cause the tiles to loosen or crack. You can install tile backer around a tub with a few common hand tools in a couple of hours. Read more…

How to Install Cement Backerboard Around A Tub

Be prepared for a noxious odor when you cut cement backerboard. No kidding. Wear a respirator when cutting this or any other cement-based product. Installing cement backerboard is not on the top-ten list of fun projects because the material is difficult to handle. But working with the panels is a short-term stint compared with the long-lasting and durable surface they provide. Read more…

How to Clean Grout Using Vinegar And Ammonia

Clean GroutDo a preliminary clean. Before you get down to the deep cleaning methods, it is necessary to do a regular clean up of your tile. Follow your regular cleaning process of wiping down counters or sweeping and mopping floors. This will get all the top layer of scum off, and make your work a bit easier.

Create your solution. In a bucket or large bowl, mix 7 cups of warm water, 1/2 cup of baking soda, 1/3 cup of ammonia, and 1/4 cup of white vinegar. Allow all the ingredients to mix completely, so the baking soda is dissolved.

Pour the mixture in a spray bottle. Keeping this in a spray bottle will make it easy to mist the dirtiest areas specifically, and for storage. Fill your spray bottle completely, and then shake the solution well.

Spray the grout. Start on a small area, only as large as 1-2 square feet total. Spray your cleaning solution over the grout so it is dampened. Allow the mixture to set for 3-5 minutes to work into the grout.

Related Topic: How to Clean Grout on Tile Floors

Begin scrubbing. Use a scrubbing brush of your choice – a hard bristled cleaning brush, a toothbrush, or a magic eraser are all good options. Put some hard work into your scrubbing to get the ground-in dirt out from between your tiles.

Clean up the dirty liquid. All your scrubbing has probably created little pools of dirty liquid on your tiles. Use a damp cloth to wipe this up, and wring it out into a separate container. This will keep your tiles cleaner in the end.

Complete your grout cleaning. Use the above process to move onto the rest of your grout, giving all it a thorough cleaning. Focus on simply getting the dirt and dark areas out of your grout, exposing the natural white underneath.

Do a final wipe-down. When you are convinced your grout cleaning is finished, do a second clean up of the entire area. If you were working on counters or in a bathroom, use a generic cleaning spray and rag to wipe down your tiles. For floors, go ahead, mop your tiles again, and towel dry.

Click Here For More Ways Of Cleaning Grout

How Much Does a Whole House Remodel Cost?

Remodeling your home can increase its value and improve comfort, style, and function for your family. The scope and features of your remodel will help determine the contractors, materials, skills, and equipment needed for the job, which will contribute to its overall cost. Consult with your designer or contractor to plan and budget for each phase and aspect of your renovation.

Ways to Save On Your Remodel

Busting the budget is everyone’s biggest fear when it comes to renovation. And with good reason. Even if you follow the essential advice we’ve been doling out for years—build in a 20 percent cushion to cover the nasty surprises, get contractor references and check them, banish the words “while you’re at it” from your vocabulary—it’s hard not to end up shelling out more than you want to, even if you want to pen a check for a million bucks.

House Remodel Cost

But why scale back a project or forgo that Viking range? No, what you need to do is get your dream at a price you can afford. And not by cheaping out, either. With some strategic thinking about design, materials, and timing, you can cut costs without cutting corners. On the following pages, we’ll show you the ways, from the big (knock down the house and start over) to something as small as choosing a wall sconce over a recessed light. But another universal truth about renovations is that every little thing adds up. So save a little here, save a little there, and pretty soon you’re talking about real money.,,1186851,00.html

The need to renovate the home is commonly realized by the changing demands of the family or individual who inhabits it. Some of these include: new family members which calls for the need to expand living spaces; a new style preference which leads to the desire to repaint or refurnish; or maybe life events that require new space functions which may lead to knocking down walls or raising the ceiling.

If you’re thinking of renovating your space, it’s helpful to know the basics. Here are some handy tidbits that you need to know when the time for an upgrade comes.

Marble Tiles

Scientifically speaking, marble is a “non-foliated metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or dolomite.” Geologists use the term “marble” to refer to metamorphosed limestone; however, stonemasons use the term more broadly to encompass unmetamorphosed limestone. Marble is commonly used for sculpture and as a building material.

With this, it can be inferred that marble is one o the most sturdy rocks we have in our planet. Therefore, we can always depend on it when it comes to home decor as marble is now made into tiles.

Marble tiles are well-known for their elaborate and sophisticated beauty. For centuries, marble tiles have been a representation of wealth, giving off superiority and an air of creativity that make the marble tile a preferred choice.

Marble tiles can be found asa common attribute in the Roman and Greek spas of ancient humanity. From Renaissance courtyards in Europe, all the way to Trump Tower in New York City today, marble has been a heavily utilised natural stone.

Marble Tiles are popularly used in:

  • Modern Kitchens.  A classic black and white marble tile used in the kitchen and laid in a diamond outline is given a new edge by using flecked marble.
  • Patio. Marble gives an edge to create your patio with a master’s touch. Marble tiles offer durability with striking good looks.
  • Living room. You can do a marble surround of your TV set for example. This is one of the cool ways to elegantly beautify your living area.
  • Bathrooms. Marble tiles in the bathroom are best paired with a nice chandelier and a complementary tub for a fresh and appealing look.
  • Foyers. Use a colorful marble tile here. You can spice up the foyer with a colorful patchwork of marble tiles.
  • Fireplace. You can use white or gray marble placed carefully on your fireplace,and the mantle and floor. Watch out for the marble stains though!

Benefits of our Marble Tile

Marble tiles are usually quarried and cut in places where quality is of high importance, such as Spain, Italy, and Turkey. Marble is also available in a variety of different colors to suit your artistic and practical requirements. Most marble tiles are veined with seams of delicate colour on a varied backdrop of simple tones. They can proffer a subtle or a gallantfeature for an up to datetrendydesign, offering colours such as brown, and beige, white and even red.